cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
380
Views
0
Helpful
1
Replies

vlan l3

Samaj0101
Spotlight
Spotlight

I have 2 networks 172.16.0.1(LAN) and 10.0.0.0(for other use like the camera and all) I want to do VLAN in 172 network

{ VLAN -2 department 1

VLAN -3 department 2

VLAN -4 department 3

VLAN -5 department 4 }

and allow only server and internet in VLAN 2,3,4 and allow all access to VLAN 5 including 10 networks for admin

and how to config that 10 networks? And from that 10 network biomatrix systems is configured and that data goes to pc IP172.16.0.143 so how to configure that?  we have 2 access points so what I should do with that?

Internet is coming from firewall then goes to switch.

There is 5 L3 [Switch sg350] 3 switch for data and other 2 for 10 network according to that how to  config vlan?

1 Reply 1

Hello,

 

post a drawing of your topology showing what devices are involved, how they are connected, what IP addressing is being used, and what you want to accomplish.

Review Cisco Networking for a $25 gift card