06-07-2018 06:13 AM - edited 03-08-2019 03:17 PM
Hi Everyone,
Since two week, i work on new network infrastrucre.
With RGPD plan we need to isolate somes employee so i use vlan for that.
Overall the configuration work fine, but now i need to same similar setting with guest wifi.
It's little bit complex to explain but for sumary we have one catalyst 3560 for core network.
This switch is connected to our provider router (Orange), this network is allowed for guest wifi
Issue is :
My smartphone terminal Pda1 can't access to internet with SSID2 on vlan210 , but i don't understand because the Pda0 is ok with the same ssid on the same vlan.
I suppose the problem is located between TOUSW03 and TOUSW02 but not sure
Schema :
Someone can help with this issue ?
Solved! Go to Solution.
06-07-2018 06:57 AM
Hello,
check if VLAN 210 is present on all switches (show vlan)...
Also,do your wireless clients get an IP address, and from where ?
06-07-2018 08:29 AM - edited 06-07-2018 11:55 PM
Hi Georg Pauwen
You're right the vlan doesn't appear with the cli "Sh Vlan" on TOUSW03 and TOUSW04
I'm only refear to cli "sh running" i forgot to do :
Vlan 210 name Guest no shutdown
Manu thank's for your tips ;)
Regards,
06-07-2018 06:57 AM
Hello,
check if VLAN 210 is present on all switches (show vlan)...
Also,do your wireless clients get an IP address, and from where ?
06-07-2018 08:29 AM - edited 06-07-2018 11:55 PM
Hi Georg Pauwen
You're right the vlan doesn't appear with the cli "Sh Vlan" on TOUSW03 and TOUSW04
I'm only refear to cli "sh running" i forgot to do :
Vlan 210 name Guest no shutdown
Manu thank's for your tips ;)
Regards,
06-07-2018 08:32 AM - edited 06-07-2018 08:34 AM
Hello
Also try adding
int vlan 210
ip helper-address ( dhcp server)
res
paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide