Vlan mapping

[Luis Trincheiras]

Hi,

I need to know what the limit vlan mapping we can do on the following equipment.

CISCO#sh ver

Cisco IOS Software, ME340x Software (ME340x-METROIPACCESSK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Compiled Thu 05-May-11 17:37 by prod_rel_team

Image text-base: 0x01000000, data-base: 0x02F00000

ROM: Bootstrap program is ME340x boot loader

BOOTLDR: ME340x Boot Loader (ME340x-HBOOT-M) Version 12.2(44r)EY, RELEASE SOFTWARE (fc1)

CISCO uptime is 1 week, 6 days, 1 hour, 2 minutes

System returned to ROM by power-on

System restarted at 10:09:26 WEST Wed Jun 6 2012

System image file is "flash:me340x-metroipaccessk9-mz.122-55.SE3.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco ME-3400EG-2CS-A (PowerPC405) processor (revision A0) with 131072K bytes of memory.

Processor board ID FOC1342X0U1

Last reset from power-on

4 Virtual Ethernet interfaces

1 FastEthernet interface

4 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : 00:27:0C:F3:0D:80

Motherboard assembly number     : 73-11448-08

Power supply part number        : 341-0208-01

Motherboard serial number       : FOC134225KP

Power supply serial number      : LIT13390233

Model revision number           : A0

Motherboard revision number     : A0

Model number                    : ME-3400EG-2CS-A

Daughterboard assembly number   : 73-10798-03

Daughterboard serial number     : FOC13410WN4

System serial number            : FOC1342X0U1

Top Assembly Part Number        : 800-29839-01

Top Assembly Revision Number    : B0

Version ID                      : V01

CLEI Code Number                : COMX200ARA

Daughterboard revision number   : A0

Hardware Board Revision Number  : 0x04

Switch Ports Model              SW Version            SW Image                

------ ----- -----              ----------            ----------              

*    1 4     ME-3400EG-2CS-A    12.2(55)SE3           ME340x-METROIPACCESSK9-M

Configuration register is 0xF

Can you help me, please?

Thanks you

[rahurao]

Hi Luis,

I checked for the limitations for the Metro Ethernet 3400 and found the below limitations:

Platform Support

•802.1q-tunnel-port mode: Cisco ME 3400E and ME 3400 switches.

•Selective Q-in-Q (support for 1-to-2 VLAN mapping, but not 1-to-1 VLAN mapping): ME 3400E switches only.

•802.1ad UNI (only C-UNI 1-to-2 mapping): ME 3400E switches only.

You can refer the below links for reference:

http://www.cisco.com/en/US/docs/switches/metro/me3400e/software/release/12.2_44_ey/configuration/guide/swtunnel.html#wp1052756

http://www.cisco.com/en/US/docs/switches/metro/me3400e/software/release/12.2_54_se/release/notes/OL22235.html

I didn't found any other limitations on the same.

HTH

Rahul K. Rao

[Luis Trincheiras]

Hello Rahul,

Thanks for your response.

Loot that output:

sh platform vlan mapping usage

Platform Vlan Mapping Information

---------------------------------

Port ASIC 0

Region Name        | Min | Start | End | Used | Avail | Total | Percentage

==========================================================================

Loopback             0     0       0     0      0       0       0%

Drop                 0     0       506   0      506     506     0%

Match 2 vlans        0     506     1012  0      506     506     0%

Match 1 vlan         0     1012    1518  0      506     506     0%

Default operations   16    1518    1534  0      16      16      0%

Vlan blocking        0     1534    2040  0      506     506     0%

Catch all            8     2040    2048  8      0       8       100%

--------------------------------------------------------------------------

* = region needs compacting

Section Total

Start | End  | Used | Avail | Total | Percentage

===============================================

0       2048   8      2040    2048    0%

What you say?

I think we have 2048 vlan mapping totaly .......

Thanks