Hi
Sh vtp status shows mode is client but the Configuration Revision : 0 It could be a password issue ? . On other switches Conf .revision is 220 .
But there are some vlan populated but still Configuration Revision : 0 . How can i solve without affecting the existing users
Thanks
If yes how can
Sh vtp status
VTP Version capable : 1 to 3
VTP version running : 3
VTP Domain Name : Site1
VTP Pruning Mode : Disabled
VTP Traps Generation : Enabled
Device ID : 001a.e3e7.0380
Feature VLAN:
--------------
VTP Operating Mode : Client
Number of existing VLANs : 70
Number of existing extended VLANs : 0
Configuration Revision : 0
Primary ID : 0000.0000.0000
Primary Description :
MD5 digest : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Feature MST:
--------------
VTP Operating Mode : Transparent
Feature UNKNOWN:
--------------
VTP Operating Mode : Transparent
