05-12-2015 06:49 AM - edited 03-07-2019 11:58 PM
Hi!
I don't know how to ask this question but I am really stuck on this.
I am trying to configure TMG on windows server 2008 for HTTP and HTTPS Filtering.
I have routed all internet traffic to my default route on L3 300-28 (TMG Server interface e.g. 192.168.0.1).
e.g. IP Route 0.0.0.0 0.0.0.0 192.168.0.1
e.g. I have configured Vlan 10 (10.10.10.2 255.255.255.0 GW 10.10.10.1)
Now on the Client Computer
When I browse the HTTP traffic without proxy settings, it work fine HTTPS do not work. BUT when I put the proxy settings in the browser It could not open no HTTP nor HTTPS.
Any body help me to understand how to do that?
05-12-2015 12:24 PM
Hi.
Have you added a static route to VLAN10 (10.10.10.0/24)
on your TMG to point at the 192.168.0.X address on your 300 L3 box
Regards
Alex
05-12-2015 02:20 PM
Hi!
Yes Alex.
It's like 10.10.0.0 0.0.255.255 GW 92.168.0.10 (My L3 Box IP)
I can see the route by route print.
05-14-2015 05:20 AM
Not all that familiar with TMG but it sounds like its working for HTTP just not HTTPS? Go into TMG administrations and verify HTTP hits are passing through and then troubleshoot what it takes to get HTTPS flowing through that box as well. I'm not sure that its a network issue unless there is more related config you're not mentioning :-) I know sometime people do a policy route to just pass HTTP through these types of appliances...
Include a topology and some more config if you would like some more thoughts on it.
Be sure to rate helpful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide