I don't have access to PT right now. if u have 2 PCs inside of a vlan, they should be able to ping themselves. if u want to ping outside of vlan, then PC need a default gateway set and need a router or l3 sw to route between vlans.
Review the new PT file (attached) and see what has been applied to obtain the goals suggested in your instructions.
Basically trunks were created between the switches with vlan 99 as the native vlan also the appropriate L2 vlans applied on Sw1 and vtp propagated to sw2-3.
Lastly the access ports was created on switch2/3 and assigned to there related pc vlans with fa0/11 on sw3 also having a voice vlan and trusting qos COS.
Please rate and mark as an accepted solution if you have found any of the information provided useful. This then could assist others on these forums to find a valuable answer and broadens the community’s global network.
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.
Read a preview of my book OSPF The ultimate for CCIE Enterprise and Infrastructure exam in Books Google Doc.
Read a preview of my book OSPF The ultimate for CCIE Enterprise and Infrastructure exam in Books Google Doc #CCIE #Cisco #exam #Enterprise ...
Question 1: What are the OSPF Loop Prevention Mechanisms
In single area, the routers have the Link State Database, having the same LSDB helps the routers to build a loop-free topology.
Now in a multiarea topology, the ABRs are respon...