cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2194
Views
0
Helpful
15
Replies

VSS with multiple supervisor engines

Colin Higgins
Level 2
Level 2

Is it possible to do VSS between multipe supervisor 2T engines? (I have only seen configurations using one in each switch)

Is there an advantage?

15 Replies 15

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

To also answer your earlier question, yes I too understand all sups should forward traffic on their links.  However, unsure whether 2nd sup (with chassis in VSS config) actually also forwards packets.  (I.e. it might be just a warm standby, like dual sup720s in a chassis.)

Also yes, you can place 6 (or as Leo notes 8) links into a Etherchannel.  However, why would you need that much bandwidth, perhaps in case a whole line card fails?  (An ideal VSS shouldn't normally be using its VSL as all other device connections should be dual homed to the chassis pair.)