VTP issue

[hamza-ali]

Hi All, i have an vtp server switch i want that my client switch get an vlan from server switch..but client switch unable to get an vlans from server...


please find server switch trunk config:

description "3850_Switch_VTP"
switchport trunk encapsulation dot1q
switchport mode trunk
end

please find client switch trunk config: (Configuration not excepted on cisco switch  interface: switchport trunk encapsulation dot1q)
switchport mode trunk
end

[pieterh]

Start with " show CDP neighbor" 

The output shows the configured vtp domain, and management vlan  wich should match both ends 

Next check " show vtp status"

If different,  configure vtp domain. vtp version. vtp password. Then 

[Cristian Matei]

Hi,

   Please provide following output of following commands from both switches: "show vlan brief" , "show vtp status" , "show vtp password" , "show vtp interface" , "show vtp devices" , "show interfaces trunk" , "show cdp neighbors".

   Are switches directly connected or are there other intermediate switches in the path?

Thanks,

Cristian.