cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2822
Views
5
Helpful
3
Replies

WCCP in Catalyst 9300

giangle
Level 1
Level 1

Hello all

I am considering to buy 2 switches Cisco Catalyst 9300 for running Stack and configure WCCP on Cat 9300. I didn't find information about Cat 9300 support WCCP. If it support, please give me document to configure it.

 

Thanks so much

1 Accepted Solution

Accepted Solutions

Francesco Molino
VIP Alumni
VIP Alumni
Hi

Yes it is supported with the oldest (and newer) version with network advantage license.
You can take a look on Cisco ios feature navigator: https://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/index.jsp

To have some configuration help, take a look on the configuration guide or command reference.
Here one the number links on Cisco website:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-5/command_reference/b_165_9300_cr/b_165_9300_cr_chapter_01011.html#wp3145726977

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

View solution in original post

3 Replies 3

Francesco Molino
VIP Alumni
VIP Alumni
Hi

Yes it is supported with the oldest (and newer) version with network advantage license.
You can take a look on Cisco ios feature navigator: https://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/index.jsp

To have some configuration help, take a look on the configuration guide or command reference.
Here one the number links on Cisco website:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-5/command_reference/b_165_9300_cr/b_165_9300_cr_chapter_01011.html#wp3145726977

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

Thanks so much Francesco Molino.

You're welcome Giangle

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question