07-18-2012 02:33 AM - last edited on 03-07-2019 07:50 AM by NikolaIvanov
Can anybody confirm for me which actions will cause an eigrp neighbor relationship to drop/ re-establish and reconverge?
I.e. Does adding a network statement cause a reconvergence?
Cheers,
Neil
07-18-2012 02:51 AM
Hi,
take a look at the neighbour flapping part in this doc:http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094613.shtml
Regards.
Alain
Don't forget to rate helpful posts.
07-18-2012 02:59 AM
Alain - thanks for this. I was looking more for administrative changes that will cause an outage...
Neil
07-18-2012 03:13 AM
Hi,
adding a network command won't do this unless of course the network command is comprising the link between the neighbours.
what are you intending to do or what did you do so the neighbourship could or is failing ?
Regards.
Alain.
Don't forget to rate helpful posts.
07-18-2012 03:45 AM
Hello Neil,
To my best knowledge (and as far as I can recall), these are the situations causing EIGRP neighbors to resync or drop and reestablish an adjacency:
Anyone else to add another situations where EIGRP neighbors resync?
Best regards,
Peter
07-18-2012 03:58 AM
Thanks Peter - just what I was looking for.
Thanks for your help too Alain.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide