What Device on Which port

[townofnewmarket]

I want to map out my VOIP network.

I want to be able to tell what phone is on what port of my 3560. Is there a way to sort of ask the 3560 "what IP address is attached to you?"

Thanks.

[Edison Ortiz · Accepted solution]

The phones are shown on CDP, type show cdp neighbor detail

Note.- I'm assuming you are using Cisco phones.

HTH,

__

Edison.

[massimiliano.serafino]

Hi,

If the telephone is Cisco you can use the command:

"show cdp neighbor detail".

I hope this helps.

Best regards.

Massimiliano.

[ankbhasi]

Hi Friend,

You can issue "show cdp nei detail" and it will list you the neighbor details on that por with the ip address.

Also you can issue a command "sh mac-adress-table " and get the mac address of the ip phone learned on that port and then go to the layer 3 switch if 3560 is not working as layer 3 switch and issue a command "sh ip arp " and get the ip address for that mac address.

If your requirement is something else please come back with the same.

HTH

Ankur

*Pls rate all helpfull post