04-09-2007 05:18 AM - edited 03-05-2019 03:22 PM
Hi
Have an 2600 router, with IOS IOS (tm) C2600 Software (C2600-I-M), Version 12.3(3), RELEASE SOFTWARE (fc2)
I do not have support for the IGRP prot?
How do i get support for that, any ideas about what IOS i have to download?
Solved! Go to Solution.
04-09-2007 12:35 PM
IP feature set should be good enough.
Here's a GD code that you can use c2600-i-mz.12.2-40.
HTH
Sundar
04-09-2007 11:13 AM
Access the software advisor tool on CCO at the following link and choose the option 'Find software with the features I need' and select IGRP and to find images that support IGRP.
http://cisco.com/en/US/support/tsd_most_requested_tools.html
I don't know what's the model of the 2600 you have. IGRP on 2611 is supported in 12.2(11)T7 or earlier versions. It appears you may have to downgrade the code to 12.2 or earlier version to enable IGRP. But, check the software advisor tool to pick the right image.
BTW, is there any specific reason why you want to run IGRP. You can consider EIGRP, successor to IGRP, and there are lot of similarities between them.
HTH
Sundar
04-09-2007 12:18 PM
Thanks, yeah, sort of know that, but i am runing a lab and want support for IGRP for now. Thanks for help, so far. Would get back to you.
04-09-2007 12:25 PM
Have a 2621
04-09-2007 12:28 PM
Hi
What feature set should i select? This is only a home lab for my Cisco study.
/ama
04-09-2007 12:35 PM
IP feature set should be good enough.
Here's a GD code that you can use c2600-i-mz.12.2-40.
HTH
Sundar
04-09-2007 01:11 PM
Thanks, that was the one i ended up with, have upgraded, and all is fine.
Thanks a lot.
04-09-2007 12:40 PM
IGRP support was removed in 12.3T. You'll need to run an IOS 12.2 or earlier to use IGRP. Or better yet use EIGRP or the like.
--andy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide