cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2043
Views
9
Helpful
6
Replies

What is meaning backup on HSRP statas?

universal777
Level 1
Level 1

Hi ALL,

What is meaning backup on HSRP statas?

There are 5 vlans.

The other four vlans aren't backup status.

Only one of five vlans display messeages.

When I reload Catalyst3750E-1,debug log is the fwolloing.

Regards,

Keiko

(netowork Structure)

++++++++++++       (GEC)               ++++++++++++++

Catalyst3750E-1=============== Catalyst3750E-2

++++++++++++       (GEC)               ++++++++++++++

              |                                                       |

              |                                                       |

     +++++++++++++++++++++++++++++++

                 Catalyst2960S

     +++++++++++++++++++++++++++++++

              |             |             |             |             |

  

     +++++++++++++++++++++++++++++++

               PC

     +++++++++++++++++++++++++++++++

( Catalyst3750E-1)

interface Vlan200

description ### Client Seg ###

ip address 172.16.200.252 255.255.255.0

ip broadcast-address 172.16.200.255

no ip redirects

standby 200 ip 172.16.200.251

standby 200 priority 150

standby 200 preempt

(Catalyst3750E-2)

interface Vlan200

description ### Client Seg ###

ip address 172.16.200.253 255.255.255.0

ip broadcast-address 172.16.200.255

no ip redirects

standby 200 ip 172.16.200.251

6 Replies 6

Eugene Khabarov
Level 7
Level 7

http://www.cisco.com/en/US/docs/ios-xml/ios/ipapp_fhrp/configuration/15-1mt/fhp-hsrp.html#GUID-B4353150-F14A-4C2C-B7D2-1EDC290E0A98

HSRP detects when the designated active router  fails, at which point a selected standby router assumes control of the  MAC and IP addresses of the Hot Standby group. A new standby router is  also selected at that time.

___

HTH. Please rate this post if it was helpful. If this solves your problem, please mark this post as "Correct Answer."

Hi Euqene Khabarov -san,

 

Thank you for replying.

HSRP state doesn't have backup state.

I don’t understand that one of five vlans was displayed.

Hi Keiko,

What is the issue, what you want to know.
Is you want per vlan HSRP whcih means you will have default gateway redundancy for all configured vlans.

Please rate the helpfull posts.
Regards,
Naidu.

I've got your question. Now I'm understand.

Backup is one of the states that HSRP transitioning during it's process.

Look at this documents:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094afd.shtml

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800942f7.shtml

___

HTH. Please rate this post if it was helpful. If this solves your problem, please mark this post as "Correct Answer"

Hi Eugen Khabarov,

Thank you for your cooperation.

I understood the meaning enough.

Regards,

Keiko

Hi Naidu,

Sorry for confusing your idea.

Regards,

Keiko

Review Cisco Networking for a $25 gift card