03-11-2012
12:54 PM
- last edited on
03-25-2019
04:19 PM
by
ciscomoderator
What is the Depth in inches of a Cisco 3750X stack with all the stackwise and Stackpower cabling?
We have a tight cabinet which is only 21 inches deep. The Datasheet says most 3750X run 18 inches deep. How many inches do the cables used for stack power and stackwise. I know from experience that the stackpower cables are very rigid and stick out a few inches but I didn't get to measure when I installed them before and the datasheet does not say.
Regards,
Kevin
03-11-2012 01:03 PM
Hello!
I have a set of 3750's stacked right now next to me. They are 3750 G's...how many are in your stack. I've got a tape measure. Let me know how many in your stack, and I'll go measure right now
03-11-2012 01:49 PM
Here it is:
Physical specifications | H x W x D: 1.73 x 17.5 x 20.5 in. (4.4 x 44.5 x 52.1 cm) Weight: 19.8 lb (9.0 kg) |
Have a look at table-23 in the data sheet:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/data_sheet_c78-584733.html
HTH
03-11-2012 02:11 PM
Hi
I am sorry but you will get the measurements in cm.
The switch itself is 41 cm add another 3.5 cm for the hardparts of the powersupply for a total of 44,5 cm without cabels.
(This is not with the 1100w powersupply that adds another couple of cm since it is bigger than the other powersupplys.)
The stackpower cabeling (original) adds another 16.5 cm to the 41 of the switch for a total of 57.5 cm.
The Stackingcabel (original) adds another 22,5 cm to the 41 cm for a total of 63,5 cm
Add to that the apropriate amount of space for air to flow to cool the switches properly.
The cabels are the ones that comes with the unit from the start.
Good luck
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide