What SFP+ module to buy to connect WS-C2960X-24TD-L and WS-C2960XR-48LPD-I ?

[Elrick Landon]

Hi to all,

I need to connect two switch together with OM3 fiber : WS-C2960X-24TD-L and WS-C2960XR-48LPD-I

Both have SFP+ port, the distance between us is around 30 meters.

I need to have the better performance/bandwidth, what is the SFP module to purchase please ?

Best Regards.

[Julio E. Moisa]

Hi,

Below you will find the compatible SFP per device:

https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html

Remember, each end must use the same SFP model. 

Hope it is useful

:-)

[Philip D'Ath]

Use GLC-SX-MMD.

[Elrick Landon]

I need 10Gbe SFP module, the one that you suggest is only Gbe.

[Philip D'Ath]

Oops, sorry. You need this document:

https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/10GE_Tx_Matrix.html

You'll want:

SFP-10G-SR

[Julio E. Moisa]

Hi

If it is 10G you could use the multimode SFP: SFP-10G-SR

:-)