Why I cannot send pings to the web server?

[netSys.py]

Good afternoon,

I cannot send pings to the web server located outside of the network.

Routers are setup with RIPv2.

What's wrong?

Greetings.

[Kasun Bandara]

share pkt file here

[netSys.py]

Thanks, I recently attached it.

[balaji.bandi]

Looks for me routing issue. try traceroute from the router and see if that reachable ?

from what device you trying to Ping to Server (you able to reach PC0 - that means your Lan side ok)

check ping from

REEXT - Server - is the ping works ?

ISP1 to Server - is the ping works ?

ISP2 to Server - is the ping works ?

Note : loking at diagram the config on REEXT FA0/1 - as per the output it was configured Fas 2/0 - is this correct informaiton ?

[netSys.py]

Hi @balaji.bandi ,

REXT - Server - ping works:

ISP1 - Server ping works:

ISP2 - Server ping works:

PC0 to Server - ping does not work

[balaji.bandi]

this looks for me PC0 network not able to reach ? does the PC0 network can reach their gateway sitting in ISP1 or ISP2 ?

apolgies i do not use packet tracer, if you can post the config i can look and suggest you, or wait for others to comment who has PT to load your lab.

[netSys.py]

I compressed the .pkt and .pkz

[Georg Pauwen]

What are the passwords for the router ?

[netSys.py]

The password is example for routers and switches.

[Georg Pauwen]

Hello,

it looks like you are using the wrong hardware. You have inserted modules into an empty chassis. The server cannot ping its default gateway, and vice versa. Try and use preconfigured devices from the available routers and switches.

[Kasun Bandara · Accepted solution]

replaced switch with 2960 and server with new server and things worked successfully. 

[netSys.py]

Thanks a lot