Solved: Re: WIC-1T to HWIC-1T connection

Marcogiraldo86 · ‎07-19-2024

Hi

I am building an home laboratory with some routers.

I'd like to know if can I connect Cisco 1841 with WIC-1T interface to a Cisco 2921 with HWIC-2T interface?

The true cable should be CAB-SS-2660X?

Reza Sharifi · ‎07-19-2024

Hi,

That is for cross-connecting a 60-pin to a 26-pin WIC, which should work fine. You would need to make one side DTE and the other side DCE.

https://www.cisco.com/c/en/us/support/docs/routers/3600-series-multiservice-platforms/7261-wic-2t.html

HTH

View solution in original post

marce1000 · ‎07-19-2024

- Review this thread : https://dvswitch.groups.io/g/Quantar-Bridge/topic/72936069

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Marcogiraldo86 · ‎07-19-2024

Hi

they talked about other type of cable.

I need help to know if two serial port with different interface type can run with cross cable cross that have code: CAB-SS-2660X

Reza Sharifi · ‎07-19-2024

Hi,

That is for cross-connecting a 60-pin to a 26-pin WIC, which should work fine. You would need to make one side DTE and the other side DCE.

https://www.cisco.com/c/en/us/support/docs/routers/3600-series-multiservice-platforms/7261-wic-2t.html

HTH