05-30-2008 10:49 PM - edited 03-05-2019 11:20 PM
Hi All,
Please excuse my lack of network knowledge but I am trying to follow the Cisco configuration example provided here:
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml
I have a 4402 controller connected to a 3750 via fibre on GE1/0/1 (VLAN60 Trunk), an AP on FE1/0/3 (VLAN5 10.5.5.1 /24) and my laptop connected to FE1/0/1 (VLAN50 192.168.50.1 /24).
The example doesnt explain anything about connecting the DHCP server. My access points send out a DISCOVERY but receive no response.
Can anybody help me out?
Rav
05-31-2008 05:02 AM
Rav,
Where is the DHCP server? Do you want the WLC to give out the addresses?
05-31-2008 04:37 PM
Hi,
I have now gotten rid of the VLAN50 to try and make things simpler. My DHCP server is on 192.168.60.10 which is same VLAN as WLC (VLAN60).
I cannot ping the WLC from any computer or even the switch. I cannot access the WLC web manager.
Rav
06-01-2008 12:00 PM
Sounds like you have a trunking config problem on your WLC. What VLANs are being used, what does the switch interface config look like and how are the WLC interfaces configured?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide