WLC AP Configuration Example

[ravinator]

Hi All,

Please excuse my lack of network knowledge but I am trying to follow the Cisco configuration example provided here:

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml

I have a 4402 controller connected to a 3750 via fibre on GE1/0/1 (VLAN60 Trunk), an AP on FE1/0/3 (VLAN5 10.5.5.1 /24) and my laptop connected to FE1/0/1 (VLAN50 192.168.50.1 /24).

The example doesnt explain anything about connecting the DHCP server. My access points send out a DISCOVERY but receive no response.

Can anybody help me out?

Rav

[andrew.prince]

Rav,

Where is the DHCP server? Do you want the WLC to give out the addresses?

[ravinator]

Hi,

I have now gotten rid of the VLAN50 to try and make things simpler. My DHCP server is on 192.168.60.10 which is same VLAN as WLC (VLAN60).

I cannot ping the WLC from any computer or even the switch. I cannot access the WLC web manager.

Rav

[jcoke]

Sounds like you have a trunking config problem on your WLC. What VLANs are being used, what does the switch interface config look like and how are the WLC interfaces configured?