WRR Queue Configurations unable to configure the interface on 9300

[scorpio20]

 IOS-XE Cisco 9300 why does not it take the "wrr" commands?

Thank You in advance....

[Matt Delony · Accepted solution]

Hello scorpio20,

The C9400 switch uses Modular QoS CLI (MQC), which is different command syntax from C6500 switch.

Please reference following config guides for QoS settings on C9400:

C9400 Configuring QoS

C9400 Configuring Weighted Random Early Detection

[scorpio20]

Matt Delony,

Thank you so much.