07-08-2007 07:42 AM - edited 03-05-2019 05:11 PM
I have two ws-c2924m. One is ws-c2924m-xl-a and the otheris ws-c2924-xl-en. What happens if I put the same IOS on both switches c2900xl-c3h2s-mz.120-5.WC3b.bin. Will the ws-c2924m-xl-a run the enterprise software?
07-08-2007 11:01 AM
Yes, ws-c2924m-xl-a will run image c2900xl-c3h2s-mz.120-5.WC3b.bin.
07-08-2007 12:44 PM
So what is the diffrence between the both? Is it just the image or something else?
07-08-2007 06:02 PM
Yes, the difference is with features supported at the image level. Refer to below document to know additional features supported by enterprise image:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35sa6/eescg/mascovr.htm
07-10-2007 07:09 PM
Thanks for the reply and link. But as far as the switch itself will the WS-C2924C-XL-A run the ios the sameway as a WS-C2924C-XL-EN. Or will the WS-C2924C-XL-A run the IOS in a cripled way?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide