ā05-29-2012 01:24 AM - edited ā03-07-2019 06:57 AM
How many Switches can be stacked with WS-C2960S-48FPD-L at a max..
As per my Knowledge it is 4 and as below..
Switch 1 to Switch 2
Switch 2 to Switch 3
Switch 3 to Switch 4
Switch 4 to Switch 1
If yes then, is it mandatory to do the "Switch 4 to Switch 1" stack. why am I asking this is because this stack requires a long cable and the cable which comes with the Switch is only 0.5M.
Thanks in advance.
--Shameem
Solved! Go to Solution.
ā05-29-2012 02:08 AM
Hi Shameem,
2960 allows to stuck up to 4 switches:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/qa_c67-577519.html
It is not neccessary to connect switch 1 to switch 4 stack ports. See how to connect 4 switches with 0.5 meter cables only:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-578928.html
Kind Regards,
Ivan
**Please grade this post if you find it useful.
ā05-29-2012 02:08 AM
Hi Shameem,
2960 allows to stuck up to 4 switches:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/qa_c67-577519.html
It is not neccessary to connect switch 1 to switch 4 stack ports. See how to connect 4 switches with 0.5 meter cables only:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-578928.html
Kind Regards,
Ivan
**Please grade this post if you find it useful.
ā05-29-2012 03:30 AM
Thanks for the help Ivan!!
Appreciate your help & Support..
Thanks,
Shameem
ā05-29-2012 04:06 AM
Welcome, Shameem!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide