WS-C3508G-XL and Cisco 1000 Base-T GBIC WS-G5482

[hillside-computers]

Hi all i just need to know if a ws-g5428 will work in a ws-c3508g-xl

i need to setup copper up link from a ws-c3508

i cant work out from the cisco site some doc"s say yes some say not supported

Thanks

[Leo Laohoo]

It's supported as long as you have the correct IOS.

Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix

[hillside-computers]

Hi thanks for the reply what ISO should i install

thanks

[Leo Laohoo · Accepted solution]

The matrix found in the link I've posted will tell you what is the minimum IOS but there's no harm in using the WC17 as there are more features compared to the old one.  Please try to avoid using the XU.

[Leo Laohoo · Accepted solution]

Thanks for the ratings.

[hillside-computers]

just put iso wc-17 at lease it see them

00:00:21: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC module is detected in Gi0/1.
00:00:21: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC module is detected in Gi0/2.
00:00:21: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC module is detected in Gi0/3.
00:00:21: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC module is detected in Gi0/5.

all i need to do now work out how to get to work when i plug something in it wont come up

[hillside-computers]

Hi all can someone point me to some white pages on how to config these interfaces so i can use a pc and linksys  SD 2005 10/100/1000 in that port

i can only get to work if i plug a server in to it

[hillside-computers]

fix it got a new switch