Hi,
Just acquired brand new WS-C3560CX-8PC-S from Cisco via reseller and when plugged in default configuration (I.e. from new) nothing connected there is what I can only describe as a crackle coming from the PSU area. Whilst the noise isn't invasive (I wanted a finless switch for home study) I am concerned if it is not normal!!
I've check that the power cable is connected firmly.
Any ideas? Views? Normal?
No power being used/disabled:
Feb 25 01:09:02.859: %SYS-5-CONFIG_I: Configured from console by csh power inline
Available:240.0(w) Used:0.0(w) Remaining:240.0(w)
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi0/1 off off 0.0 n/a n/a 30.0
Gi0/2 off off 0.0 n/a n/a 30.0
Gi0/3 off off 0.0 n/a n/a 30.0
Gi0/4 off off 0.0 n/a n/a 30.0
Gi0/5 off off 0.0 n/a n/a 30.0
Gi0/6 off off 0.0 n/a n/a 30.0
Gi0/7 off off 0.0 n/a n/a 30.0
Gi0/8 off off 0.0 n/a n/a 30.0
Regards
R