WS-C3560X-24T-L routing question

Cristian Bermudez · ‎08-22-2013

hello, I have a switch WS-C3560X-24T-L and want to create vlans to route traffic between them and split the traffic of servers and computers. I have several 2960 switches and I want them to see the vlans that I create in 3560. This layout is possible? I read that lan based image supports Static IP routing support

many Thanks

InayathUlla Sharieff · ‎08-22-2013

If you want the Vlans to be routed or floded across the domain then you need to use the concept of VTP.

Have the Switch 3560 is VTP Server mode and all 2960 switches in client mode.

And have the ports connecting between these devices to be trunk port.

HTH

Regards

Inayath

Cristian Bermudez · ‎08-22-2013

HI, thaks for your reply!

I'm not understand well. From WS-C3560X-24T-L (Lan Base) can i create vlans interfaces? to use as "default gateway" for each vlan? and then show them to 2960's and make switport access vlanxxx to map any port to any vlan? I show you an example

3560x T-L (Lan Base image) EXAMPLE

interface Vlan5

description Users

ip address 172.16.3.252 255.255.255.0

ip access-group 101 in

ip helper-address 130.160.0.7

ip helper-address 130.160.0.28

ip helper-address 172.16.0.37

ip directed-broadcast

standby 1 ip 172.16.3.254

standby 1 preempt

2960 example port assign to vlan 5

interface GigabitEthernet0/18
description PRN-Compras-2-R03-F22
switchport access vlan 5
switchport mode access
spanning-tree portfast
spanning-tree bpduguard enable

Reza Sharifi · ‎08-22-2013

Hi,

Sure, you can create multiple vlans with multiple SVIs. LAN Base license also support static routing:

see table-1 in this link:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/qa_c67-578933.html

HTH

Cristian Bermudez · ‎08-22-2013

Thank you Reza for you update.

Regarding this topic i've not still clear for me. I can create multiple vlans, and i've read that lan base support static routing. But i don´t if the configuration that i exposed will work. I mean, can i create vlans and have routing between them and connect others 2960's and assign swtchport configuration access vlanX ?

I need to configure a layout where my new 3560x-24T-L be my principal switch and all seven 2960 switches connect and assign vlans on it ports.

EX