cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1795
Views
0
Helpful
2
Replies

WS-C3650-24TS-S Switching Capacity

likewinered
Level 1
Level 1

Hi all.

WS-C3650-24TS-S's switching capacity is 88Gbps in datasheet. (http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/data_sheet_c78-729449.html?cachemode=refresh)

 

But, I don't know this capacity to full-duplex or half-duplex.

 

I want know C3650's switching capacity with duplex.

 

Thanks.

1 Accepted Solution

Accepted Solutions

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Cisco generally quotes switch/fabric capacity as full duplex.

As the -24TD supports dual 10g, you have 24g ports + two 10g = 44g or 88g duplex.

You -24TS is built on the same fabric, but only needs (28g ports) 56g.

View solution in original post

2 Replies 2

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Cisco generally quotes switch/fabric capacity as full duplex.

As the -24TD supports dual 10g, you have 24g ports + two 10g = 44g or 88g duplex.

You -24TS is built on the same fabric, but only needs (28g ports) 56g.

Thanks for your reply. :)
 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco