WS-C3850-48P-S for UPoE so I can get 60 watts of power

[wkarpinski]

I have a WS-C3850-48P-S switch with dual PWR-C1-1100WAC  power supplies and IP Base Licence. What do I need to do  to get UPoE on the switch so I can provide 60 watts of power to a PTZ camera?

 sh inv

NAME: "c38xx Stack", DESCR: "c38xx Stack"
PID: WS-C3850-48P      , VID: V04  , SN: FCW1850C03Y

NAME: "Switch 1", DESCR: "WS-C3850-48P-S"
PID: WS-C3850-48P-S    , VID: V04  , SN: FCW1850C03Y

NAME: "Switch 1 - Power Supply A", DESCR: "Switch 1 - Power Supply A"
PID: PWR-C1-1100WAC    , VID: V01  , SN: DTN1843V024

NAME: "Switch 1 - Power Supply B", DESCR: "Switch 1 - Power Supply B"
PID: PWR-C1-1100WAC    , VID: V01  , SN: DTN1843V026

NAME: "Switch 1 FRU Uplink Module 1", DESCR: "4x1G Uplink Module"
PID: C3850-NM-4-1G     , VID: V01  , SN: FOC1847AGAV

[Leo Laohoo · Accepted solution]

PID: WS-C3850-48P

This model only support PoE+.  

UPoE models are the WS-C3850-48U and WS-C3850-24U.

[wkarpinski]

Thank you Leo. I kind of thought it would have to be a hardware upgrade.

[Leo Laohoo]

Thanks for taking the time to rate our posts.