I have a WS-X45-SUP8-E installed into a WS-C4510R+E chassis and I keep trying to boot from a usb to then copy the image over but it keeps running into a error thus "reloading" the sup and throwing me back into rommon again. I have also tried to TFTP the ios on it and conveniently it stops around 90% every single time. Any ideas? Thanks
rommon 7 >boot usb0:cat4500es8-universalk9.SPA.03.07.02.E.152-3.E2.bin
Loading image !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Checking digital signature....
[mem:/cat4500es8-firmware]
Digitally Signed Release Software with key version A
flash0:/codesign/ios.dat open failure
Rommon reg: 0x00084F80
Reset2Reg: 0x0C200000
########
Conan controller 0x37AF15F4..0x37D4E219 Size: 0x00C962A0 @
####
Radtrooper controller 0x37955A58..0x37AF15F2 Size: 0x00661EDC @
Link: 0x00000080-0x16000000
Program Done!
Checking digital signature....
[mem:/cat4500es8-base]
Digitally Signed Release Software with key version A
flash0:/codesign/ios.dat open failure
###########
pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01)
pci 0001:02:00.0: ignoring class b20 (doesn't match header type 01)
pci 0002:04:00.0: ignoring class b20 (doesn't match header type 01)
audit: cannot initialize inotify handle
All packages are Digitally Signed
Starting System Services
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=4,mode=600,ptmxmode=000 0 0
find: `/flash1/USER': No such file or directory
Error!! POST pre-start: /flash0 is not mounted.
Loading gsbu64atomic as gdb64atomic
Using 6 for MTS slot
Platform Manager: starting in standalone mode (active)
Jun 8 15:55:24 %IOSXE-3-PLATFORM: process sysmgr
<Tue Jun 8 15:55:24 2021> Message from sysmgr: Reason Code:[2] Reset Reason:Service [licensed] pid:[4773] terminated abnormally [256].
Details:
--------
Service: License Daemon
Description: License Daemon
Executable: /usr/binos/bin/licensed
Started at Tue Jun 8 15:55:11 2021 (663492 us)
Stopped at Tue Jun 8 15:55:24 2021 (600549 us)
Uptime: 13 seconds
Start type: SRV_OPTION_RESTART_STATELESS (23)
Death reason: SYSMGR_DEATH_REASON_FAILURE_EXIT (1)
Last heartbeat 0.00 secs ago
Exit code: SYSMGR_EXITCODE_SYSERR (1)
PID: 4773
UUID: 511
umount: /proc/fs/nfsd: not mounted
/etc/rc6.d/S01reboot: line 198: umount_cisco_filesystems: command not found
Please stand by while rebooting the system...
Restarting system.
*********************************************************
* *
* ROMMON configuration is being initialized to default *
* values. This may be because it was never initialized. *
* *
*********************************************************
Verifying FPGA (P) Signature ....................... PASSED
flash0:/codesign/fpga.dat open failure
Verifying ROMMON (P) Signature ......... PASSED
flash0:/codesign/rm1.dat open failure
************************************************************
* *
* Rom Monitor *
* Copyright (c) 2012-2014 by Cisco Systems, Inc. *
* All rights reserved. *
* *
************************************************************
Rom Monitor (P) Version 15.1(1r)SG5
Compiled Thu 06-Nov-14 22:58 [RLS]
System : WS-X45-SUP8-E Slot [6] Peer [5]
Chassis : WS-C4510R*E Mod [2][4][7][8][9]
Revision : CPU 2.1 BOARD 4.0 FPGA 3.2978.834F
Memory : 4096 MB
Date : Tue Jun 08 15:55:58 2021
***** The system will autoboot in 5 seconds *****
Type Control-C to prevent autobooting....
. . . . .
config-register = 0x102
Autobooting using BOOT variable specified file.....
Could not find a valid file in BOOT environment variable.
BOOT variable can be set from IOS. To find currently set
Rom Monitor variables, please type 'set' command.
For help on choosing a boot method, type 'confreg' command.
rommon 0 >
