03-27-2012 01:46 AM - edited 03-07-2019 05:48 AM
Dear,
Cisco announced EOL for ws-x6148A-GE-45AF linecard and proposed WS-X6148E-GE-45AT. However this card seems not to be supported by the SUP2T-10G supervisor. Which alternative card should I take for this EOL linecard, or can I use the proposed linecard (use extra daughtercard DFC4)?
For short: I'm looking for an alternative linecard for the 650x-E chassis with Supervisor 2T iso 6148-GE-45AF
Thanks
Jan
03-27-2012 08:40 AM
WS-X6148E-GE-45AT is supported with Sup2T.
-Matt
03-27-2012 11:08 AM
Thx Matt,
FYI
It seems that in the pdf data_sheet_c78-648214.pdf Table 5 one forgot the 45 indication in the linecard code:
WS-X6148E-GE-AT => WS-X6148E-GE-45AT.
03-27-2012 02:46 PM
It's a "document bug". On the lower left-hand corner of the page is a "Feedback" link. Post your complaint. The document people will respond to you in 4 hours.
03-27-2012 02:54 PM
I filed CSCty92545 to get the data sheet updated.
-Matt
03-27-2012 03:51 PM
I filed CSCty92545 to get the data sheet updated.
Or one could ask their friend Cisco "contact" and they can do it without even batting an eyelash.
03-27-2012 04:23 PM
The bug addresses the lack of sup 2t on the ethernet modules page which has the 6148E module and every other sup but not the 2t.
-Matt
03-27-2012 04:52 PM
Thanks Matt.
09-03-2013 10:10 AM
WS-X6148E-GE-45AT Line card does not compitable with VS-S2T-10G/VS-S2T-10G-XL/VS-S720-10G-3C/VS-S720-10G-3CXL.So i would like to know that this line card works which type of superviosr engine..?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide