11-27-2013 05:38 AM - edited 03-07-2019 04:48 PM
Hi!
Today I have all 16 ports connected. 8 of them peaks on 2Gbit/sec.
The other 4 is dived into 2 port-channels an both portchannels are peking on approx 10Gbit/s at the same time (backup data dat goes from one end to another)
Port-channel 1 goes to ports Te1/1 and Te1/5
Port-channel 2 goes to ports Te1/9 and Te1/16
So all 4 high dens ports goes to one asic each, and one port-channel goes to on fabric channel each.
So when trafic is flowing from po1 to po2, will it go via the asics only or will it go via the switch fabric?
Regards Olle Johansson
Solved! Go to Solution.
11-27-2013 06:23 AM
Olle
So when trafic is flowing from po1 to po2, will it go via the asics only or will it go via the switch fabric?
In your example it should be switched locally ie. use the fabric asics.
Jon
11-27-2013 06:23 AM
Olle
So when trafic is flowing from po1 to po2, will it go via the asics only or will it go via the switch fabric?
In your example it should be switched locally ie. use the fabric asics.
Jon
11-27-2013 06:45 AM
Thank you!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: