02-04-2008 08:23 AM - edited 03-05-2019 08:55 PM
Hi,
Can I use auto mdix on WS-X6748-GE-TX card with native IOS ?
I read some information that with Catos the command is supported but nothing about IOS.
Regards
Solved! Go to Solution.
02-04-2008 09:51 AM
According to the command reference for the Sup32 the 'mdix auto' command is available for the WS-X6748-GE-TX:
It does state the command was added in 12.2(18)ZY for the Sup32 so if you have a Sup720 or an older Sup2/MSFC2 then it might be different.
Andy
02-04-2008 09:51 AM
According to the command reference for the Sup32 the 'mdix auto' command is available for the WS-X6748-GE-TX:
It does state the command was added in 12.2(18)ZY for the Sup32 so if you have a Sup720 or an older Sup2/MSFC2 then it might be different.
Andy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide