Hi All,
Hopefully a quick question I have a xconnect running for a customers L2 P2P circuit between our network which is successfully up and running. e.g xconnect is between SVI 100 & SVI 200 on our switches. The customer wants to send multiple tagged frames between sites.
Current setup all working
Site A
Cisco 2960 trunk to Site B
192.168.1.1
GW 192.168.1.2
Our device onsite tags all packets with vlan 100 and goes over a trunk link to a PE 3600x
Site B
Cisco 2960 trunk to Site A
192.168.1.2
GW 192.168.1.1
Our device onsite tags all packets with vlan 200 and goes over a trunk link to a PE 3600x
Now my question site A sends tagged 100 packets which land on port x on our switch and is configured to use SVI 100 this is then sent accross our network to the configured loopback address of the xconnect and vise versa. Can the customer send more tagged frames e.g 101,102,103 between the sites or does the SVI on the 3600 strip the tags and sends it to the loopback address of the remote PE?
Thanks in advance
