cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4662
Views
5
Helpful
1
Replies

You can hot plug a fiber module into an open SFP slot in a 3750 switch right?

keithsauer507
Level 5
Level 5

Hello,

 

Just wanted to confirm, I have a 3750 switch stack and there are 4 SFP slots in our top switch, 1 is used.  I want to plug in another Cisco branded mm fiber module in there.  I can just plug it in there and not have to do a reload of the switch stack correct?

 

In the config the interface is defined Gi1/0/50 for example (its a 48 port gig switch on the top of the stack).  So once I plug it in I can put that port on the proper config I want without a reload?  

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

Correct, you can add another SFP to the switch and no need for reboot.

Once added, you should see the interface come up and than configure the port.

HTH