With a call comes through in the Hunt Group, the call is broadcast to all the 7960's w/7914s. The first line shows busy on all 7914s. When a second call comes in, the first line of the 7914 rings at one station only, as if the line were idle. If a third call comes it, there is no visual dispaly anywhere, the claaing party hears ring back tone, and the call transfers to voice mail in the system default time, rather than the hunt group time, which is twice as long.
On a telephone reset, I get the following error messages in the IP address Debug Display:
File Not Found: iso-8859-1
Code:8108, P:0, S:12300900
I have researched this error, and no help has been found. I have changed the station number, I have removed the second line appearance, and still no resolution.