09-27-2017 08:10 AM - edited 03-18-2019 01:29 PM
Hi,
Can I authorize one particular user to connect to only one particular endpoint in Jabber video for Telepresence ?
Solved! Go to Solution.
09-27-2017 03:34 PM - edited 09-27-2017 03:34 PM
There is no option out of the box, but you can use CPL on your VCS to determine if a user can only call a particular endpoint while restricting calls to all other endpoints.
If you're running VCS X8.7 and later, you can do this from Configuration > Call Policy > Rules. You'll need a rule to allow endpoint A to call endpoint B, and a second rule to reject endpoint A from calling anything else. For the reject rule, you can use .* for the destination pattern, a regular expression that will match everything.
If you're running VCS X8.6.x and earlier, you'll need to use a CPL script, see below for an example, also take a look at the CPL Reference section of the VCS Admin Guides.
<cpl xmlns="urn:ietf:params:xml:ns:cpl" xmlns:taa="http://www.tandberg.net/cpl-extensions" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:ietf:params:xml:ns:cpl cpl.xsd"> <taa:routed> <taa:rule-switch> <taa:rule origin="endpointA@domain" destination="endpointB@domain"> <proxy/> </taa:rule> <taa:rule origin="endpointA@domain" destination=".*"> <reject status="403"/> </taa:rule> </taa:rule-switch> </taa:routed> </cpl>
09-27-2017 03:34 PM - edited 09-27-2017 03:34 PM
There is no option out of the box, but you can use CPL on your VCS to determine if a user can only call a particular endpoint while restricting calls to all other endpoints.
If you're running VCS X8.7 and later, you can do this from Configuration > Call Policy > Rules. You'll need a rule to allow endpoint A to call endpoint B, and a second rule to reject endpoint A from calling anything else. For the reject rule, you can use .* for the destination pattern, a regular expression that will match everything.
If you're running VCS X8.6.x and earlier, you'll need to use a CPL script, see below for an example, also take a look at the CPL Reference section of the VCS Admin Guides.
<cpl xmlns="urn:ietf:params:xml:ns:cpl" xmlns:taa="http://www.tandberg.net/cpl-extensions" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:ietf:params:xml:ns:cpl cpl.xsd"> <taa:routed> <taa:rule-switch> <taa:rule origin="endpointA@domain" destination="endpointB@domain"> <proxy/> </taa:rule> <taa:rule origin="endpointA@domain" destination=".*"> <reject status="403"/> </taa:rule> </taa:rule-switch> </taa:routed> </cpl>
09-27-2017 05:35 PM - edited 09-28-2017 05:49 AM
Thnx Patrick !!
edit : work like a charm !! thnx again !!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide