C-series/EX90 presentation sharing in main video channel

[jonwoloshyn]

Hello,

Can the C-series codec and/or the EX90 share a presentation in a point to point call with Lync or other SIP/H.323 endpoints that don't support BFCP/H.239?

I know with an MCU it'll work. I also THINK with the AMG 3610 it'll work (For Lync that is. If anyone can confirm that would be nice )

Thanks

Jon

[Tomonori Taniguchi · Accepted solution]

For C-series Endpoint (C90, C60, C40, but not C20 and SX20), support modify what video to be compose as main video.

The Cisco TC Console application lets you customize different parts of Cisco TelePresence System Codec C90, Codec C60 and Codec C40. It will allow you to create profiles which can be applied to the codec at a later time, or you can configure the system in real-time.

Using this method, you may send multiple video source into one main video stream as “one” image.

GUI base control application and instruction is available from http://developer.tandberg.com/web/guest/tools/integrators/tc-console.

API base information is available from http://developer.cisco.com/web/telepresence-developer/howtos/cseries-api/video-compositor.

For EX90, above method is not supported but you may send presentation source as main stream (but this mean you won’t send your main video).

Main video source set to “3” in default on EX90 which is mapping to embedded HD camera.

DVI input interface is mapping to “2” and HDMI input interface is mapping to “1”.

By changing main video source to 2 or 1, you able to send your external video source as main video stream (i.e. xConfiguration Video MainVideoSource: 2 to send PC presentation as main stream input from DVI interface).