Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm in the process of enabling cts manual on uplinks/downlinks for an environment that consists mainly of 3850s. I have a 6880 VSS pair and the question has now come up as to what needs to happen on the VSL link between the two switches in orde...
Hi all,
I'm just wondering what the process would be for this? Should I generate the CSR with the new server FQDN added in manually before joining the server to the cluster? Or should I join the server to the cluster first so that when the CSR gets g...
I see that running CAD or Finesse is mutually exclusive i.e. one or the other but I can't find anything about IP Phone agent.My question is, if I enable and run Finesse will IP Phone agent still work and be supported? Thanks
Hello all,I've done some 8.5 upgrades to 9.1 so I'm quite familiar with the refresh upgrade process and the additional server downtime vs. say and 8 to 8.5.On reading the upgrade guide for CUCM 9.1(1), I stumbled across this line on page 5 -"You cann...
I was having this issue on an ASA5506 that wasn't using Firesight Management.
I opened a TAC case on this. Please have a look at Bug - CSCze95695
TAC provided the following workaround.
Please note that this only affects Kenton boxes which are manage...
I opened a TAC case and they instructed me to do the following which fixed things nicely.
1) Log into the SFR module and go into expert
>expert
2) Then switch to root:
$ sudo su -
3) Navigate to the upgrade directory:
# cd /var/log/...
Hi Marvin,Are you using Firesight Management center? or did you do the upgrade via ASDM? If ASDM, what version?I have tried 3 times and have had no success.
