C40 Camera Control Maximum Cable Length RJ45 to DSUB

[kyleberezowski]

Hello,

What is the maximum cable length for the camera control port on a Cisco C40?

Thanks,

Kyle

[Patrick Sparkman · Accepted solution]

According to the PrecisionHD Camera Guide, on pg 17, the camera cables that typically come with the codecs can be 5, 6.5, or up to 20 meters.  Anything over 5 meters requires the camera be powered by the camera's power supply and not from the codec using camera control cable itself.

I have some custom installs where the camera control cable is well up to 75-100 feet.  Simply follow the pin-out on the same page noted above to make your own cable, and be sure to use the PSU-CAM-V= power supply to power the camera.

[kyleberezowski]

Hi Patrick,

Thank you so much for passing along this information. I had overlooked that information on page 17 where it points out the CAB-VDCD-20M cable.

I appreciate you taking the time to help me out!

Kind regards.