I have been able to connect to all of my ISDN wall ports and make a video connection.
As long as I use the 1st port from left of ISDN Link the connection is good.
Using the 2nd Port no connection can be made.
I can use the 1st Port and any of my 4 ISDN wall ports and make a connection.
So my 4 ISDN numbers are good. And my 1st port on my ISDN Link is good.
The ISDN Link config settings:.. H320 Nettype: BRI, Bonding, Rebonding(on), timer(normal)
ISDN parallelDial(on).
The status xml attached.
My question is why is only the 1st ISDN Link port able to complete a connection?
My ISDN Link Status is here:
BRI
Interface1
layer1Alarm:
layer2Alarm:
status: ready
Channel1
status:connect
type:BChannel
Call7
callingNumber: 'the number i can connect to'
causelocation:
channelcause:
Channel2
status: disconnected
type: BChannel
Call 9
calling#:
causeLocation: 0
channelCause: 17
Interface2
status: ready
Channel1:
status:disconnected
type:Bchannel
Channel2:
status:disconnected
type: Bchannel
TIA