TelePresence and Video Infrastructure

ArneI had a question about the chart showing the license usage in various scenarions with Lync. Specifically slide number 26. https://supportforums.cisco.com/docs/DOC-19067Under Encrypted B2B (SIP SIP call without AMG) it states Two Non Traversal. Ho...

                   Hi CommunityI have a VCS-E 7.2 and VCS-C 7.2 running in virutal Environment.Customer wants to dial from extern via IP to the VCS-E. So at VCS-E there is an incoming call for example 85.247.66.46I have tryed to make a transformation...

Is licensing in VCS envitonment similar to that of CUCM environments e.g to register a Jabber for Windows client in CUCM I need the enhanced license (BE6K-UCL-ENH) and to register a telepresence system I need the TProom license (BE6K-UCL-TP-RM).I am ...

Where is now the camera control on the web interface? The camera presets is not was the administrator must have first.With each update there is new, that's ok. but now, this is a step backwards.

Hello Techies, I have done integration of VCS (7.2) and CUCM (version 9.1). Call from VCS to CUCM are working but the incoming CLI displayed on CUCM endpoint is "Unknown". Missed call shows the called party's System Name (which is AlphaNumeric). I fo...

Hi,I need a cisco document about 6000 MXP operational temperature not environment temperature, I have tried to search but so far i cant found it. I need  something  like this:Hardware Temperature: "67.0"Hardware TemperatureThreshold: "85"Thanks in ad...

We are running a little older version of the Tandberg TMS (12.6).  It uses OpenDS.  Problem is that the person that installed it, and configured it, and administered it, has left the company.  If we disable his AD account, and try to add new users to...

The last person responsible for the system, also the person that installed it, left.  Now when we add users to the security group in AD, and try to sync in provisioning in the TMS, it will not sync in the new users.  We figured out that it is because...

I created a Reservation only type conference from TMS for 10 Endpoints for timeframe A. I got the booking conformation and the conference is saved.When i try to now book a "No Connect" conference for Timeframe A for the same above ten Endpoints, i do...

I've been getting the following errors on two seperate conferences using our MCU, being controled via TMS.Dial Failed: Description: invalid parameter: maxBitRateToMCU. System: xxx.xxx.xxx.xxx Interface: HTTP Command: 'Dial' Result from system: 'Error...