Call between sx10

[Jean Paul Enerst]

Hi Pro,

I have two sx10s configured to test with... Well both devices are registered with CUCM, can make and received calls from any device in the cluster. Both devices can call each other, the audio is flowing but no video.

Device sip profile is set to : Telepresence conferencing. in CUCM.

However, if i change the SIP profile for: Telepresence END point.  Calls between the two sx10s, drop after the first rings with error :

SIP/2.0 503 Service Unavailable
Reason: Q.850;cause=47

Any help will be appreciated.

thanks,

[Wayne DeNardi]

This is a duplicate thread - please consider removing this one and referring to https://supportforums.cisco.com/discussion/12750046/call-between-two-sx10s

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.