04-12-2017 01:22 PM - edited 03-18-2019 12:59 PM
Hi,
I have a Cisco 72-100618-01 A0 Cable that provides both video and control to an SX20.
When using this adapter i can see the video, i can move the camera but i can't move the onscreen cursor.
Is there a setting or something that has to be changed?
thank you,
Jason
04-12-2017 05:23 PM
A similar question has been asked before. Have a look at Cisco SX20 Remote Control for some ideas on what you can do to troubleshoot your issue.
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
04-27-2021 07:07 AM
This cable is for the P40 camera and will not work with the PHD12xs camera
the correct cable for the 12xs is 72-5176-01A0 CAB-HDMI-PHD12XS
Note: The cisco TRC6 remote is disabled when using a touch10
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide