04-18-2011 12:56 AM - edited 03-17-2019 10:16 PM
Hi All, our Call Manager does not support the new ATA 187's as yet as we need an upgrade, there is an upgrade in the pipe line but its not for a while yet as we need to upgrade ARC and Unitiy too.
Is there a way to change the 187 SIP to SCCP?
Thanks all
Martyn
04-30-2011 12:10 PM
Hi Martyn,
I am afraid that it is not like the older version where we can change the protocol in them.
ATA 187 is designed to support only SIP and it is built in and cannot be changed.
You can refer to the below link for product details.
HTH!
Thanks,
Manoj
05-13-2011 01:32 AM
This really sucks. I was hoping there's a way to have them register as SCCP devices. I'm having lots of trouble with 187s but not with 186s
11-01-2011 07:35 AM
After the long push for an upgrade on our CUCM I know find out that Franking machines will not work on the 187's and we now need to purchase VG202's, why do the 187's not support modem pass-through?
Thanks
Martyn
04-13-2012 11:49 AM
What is recommended for SCCP users to use beyond the 186?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide