05-16-2018 09:15 AM - edited 03-18-2019 02:06 PM
Hello.
In my eviroment I have ExpressWay for MRA
Internet>>EXP-E>>EXP-C>>Cisco UC
All the users in the organization trying to connect to jabber by MRA.
After the user logged in to Jabber for mobile(I see in CUCM the device is in Register mode)
In the mobile the UCServices write "Cannot connect to Cisco Unified Communication Manager Server, Check your network setting".
The firewall isnt blocking ports.
The status in unified communication is active, The traversal zone is active and the cucm as well.
Inside my organization(Lan) the jabber is working well.
Thanks
05-16-2018 09:28 AM
So, it shows as registered in CUCM but not on Jabber?
What happens if you call from/to the device?
What troubleshooting have you done so far?
05-16-2018 09:58 AM - edited 05-19-2018 01:38 AM
thank you for responding.
1.yes that right, it shows as registered in CUCM but not on mobile, In mobile the voice mail and IM are working but the UCServives isnt.
2.I cant call from the device because the jabber not registered with UCServices. And I nor recive a call to MRA.
3.I have cheked the firewall,Configuration on EXP-C and EXP-E.
I have tried to collect logs from EXP-C while login capture and I saw there is a problem between EXP-C in port range 350101 - 350353 ( their is no firewall between of them).
05-16-2018 10:57 AM - edited 05-16-2018 11:54 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide