Cisco Spark Kit Plus - Quad Camera Audio Line Input?

[Javones]

in the installation manual for the Cisco Spark Kit Plus there indicates an audio line input on the quad camera.  Does any know the behavior of this input?  is this a simple input to make use of the soundbar?

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/room-kit/installation-guide/cisco-spark-room-kit-plus-installation-guide-en-fr-es-pt-it-de.pdf

thanks!

[PJMack]

Yep! Line out from the codec goes to line in on the quad cam/soundbar if you are going to use is for that purpose. 

[Marc torres]

Hi PJMack 😉,
Do You Know if this Cisco Plus audio out or the Quad camera audio input is line level or just amplifiyed to feed the loudspeakers?
I´ve have not found any information about it.

Thanks in advance 🙂
MArc

[PJMack]

It's line out/in. The amplifier is in the quad cam unit if you use those speakers. 

[Marc torres]

Dear friend, thanks a lot for a soon reply.
Great!

[dwfdfesgtre84386]

The widespread room it isn't definitely intended for a twin digicam setup. It does have an HDMI input link, meant for pc display screen sharing, and you can in idea plug in a Go Pro (I actually have finished this) however its no longer in reality designed for that.