04-30-2012 05:49 PM - edited 03-17-2019 11:08 PM
Hi All,
I'm looking for an API command that shutdown the codec. I've checked the C-series API TC4 and TC5 for the said command but I wasn't able to find it.
Has anyone knows the command to shutdown the codec?
Thanks!
Solved! Go to Solution.
04-30-2012 08:55 PM
Hi,
To shutdown device i found one command on TC5.1, not checked on TC4
xcommand Boot Action:Shutdown
You can try this command to shutdown device.
Regards,
Vivek
04-30-2012 08:55 PM
Hi,
To shutdown device i found one command on TC5.1, not checked on TC4
xcommand Boot Action:Shutdown
You can try this command to shutdown device.
Regards,
Vivek
05-01-2012 05:01 AM
If you have root access you could also try the "shutdown -h now" command, but for example my E20 still just reboots
(it also does not have a powerbutton or WOL so it might be hard to turn it on again :-)
So I could picture its also dependent on the endpoint, the EX series has at least a power button.
Vivek: as the release notes of TC5.1 state that this is a new api command I would not expect it not to work in older releases.:
Changed API commands
xCommand Boot
• Added: Action:
Please remember to rate helpful responses and identify
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide