Hello everyone,
I have a Cisco TelePresence MCU 5320 that keeps showing me the same message after POST: oob_net: reply timeout
I would like your support in order recover the device.
Status LED is Off
Alarm LED is Red
Power LED is Blue
=============================== Console output ==========================
*** Copyright 2011, Cisco Systems, Inc. ***
hub_stat: 66 0A 70 71 72 73 02 67
host_stat: A5 00 01 7F 56 00 01 7F 99 80 8B 91 9A 00 01 7F 9B 9C 9D 88 AA 12 40
VID: 18
DQS Receiver Enable (Channel A): 8
DQS Receiver Enable (Channel B): 8
hello from l2!
AMD ucode patch ID: 0000000000000000
exception_init
L2.Pico (picol2) #: Wed Feb 5 18:34:57 GMT 2014
root@bv-ubuntu-17:/ram-work/systems/bootloader/picol2
Checking system timer ... OK
EEPROM digest:
92 2c 45 e4 fb ba fb a7 51 dc 06 71 bc 89 ee ac
FreeUsbd v.0.1.2
USB code initialised
FIDDLESTICKS
kernel_boot(usbfs1a:kupgrade)
kernel_boot(usbfs2a:kupgrade)
kernel_boot(fat0:kupgrade)
init
Running app_hub app_l2
app
lib
lib_oob
lib_com
lib_com/common
lib_com/health
lib_com/compute
lib_com/autoboot
lib_com/serial
lib_hpi
lib_ddr
lib_xaui
lib_vcpu
lib_sbic
lib_emac
lib_edvt
Mon May 23 14:12:02 2022
Last reboot: 0a (power failure)
GX image usbfs1a:gx.img not found
GX image : fat0:gx.img
..
GX version : default v1
..........
PCIx reset done.
Press CTRL+C to interrupt L2 boot
oob_net: reply timeout
oob_net: reply timeout
oob_net: reply timeout
oob_net: reply timeout
oob_net: reply timeout
oob_net: reply timeout
oob_net: reply timeout
=================================================
I have no idea on how to overcome this issue, any help I will appreciate.
Regards
