11-05-2014 04:23 AM - edited 03-18-2019 03:37 AM
Hello,
When adding Cisco Telepresence MX300 G2 on Unified CM version 9.1.2, it invalidate the UCM license and invoked the 60 days evaluation message on the home page. The strange thing is that the device is available in the Device pack and the end point is registered on UCM.
What I'm missing here? , Is there a special license need to be added noting that I have CUWL STD ,ENH and Basic License Uploaded on the ELM.
Please advise.
11-05-2014 05:31 AM
Hello
That's OK.
MX300 is using TelePresence Room License for CUCM.
You must buy: Part Number: LIC-TP-9X-ROOM
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100101.html
br Oleksandr
11-05-2014 06:09 AM
Thanks for your reply.
I have further one more question, license will be received as a PAK and applied to ELM once purchased or how it looks like?
Thanks,
Amr Sherif
11-05-2014 06:14 AM
Yes, you will receive PAK .
And using ELM you can activate that PAK and adding required license for your UCM .
br Oleksandr
11-05-2014 06:17 AM
Yes, you will receive PAK.
And with ELM you can add required license to your UCM.
br Oleksandr
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide