Cisco VTA between CallManagers

[wesley_lim]

Dear Network pro ,

I have a call manager cluster with two Call manager, these two call manager are using a NON Gatekeeper controlled trunk to send/receive calls to each other

IP PHONES in CCM A can place video calls using VTA to each other but as soon as I want to place a video call with IP PHONES In CCM B somehow the call will handle only as audio and the callmanager ignores the video

I didn’t see any document regarding VTA between callmanager

Can any one help me on this

[Brandon Buffin]

Pleae check the locations bandwidth under System -> Location in CCM admin for both the local and remote trunk. Verify that the video bandwidth for the Location assigned to the trunk (under Device -> Trunk) is set high enough to support a video call.

Hope this helps. If so, please rate the post.

Brandon