07-31-2019 10:00 PM
Hi all,
We have a client that has a MSE cluster with 5 x 8510s, with 2 of these being clustered into a single cluster separate from our Conductor.
Entity 1
TMS > 1 Clustered MCU > 2 x 8510s
Entity 2
TMS > Conductor > 3 x 8510s
We need to expand on entity 1's port capability and they are reluctant to move to CMS just yet. Is it possible to add a 4520 or 4510 to the 2 clustered 8510's so that it looks like this:
TMS > 1 Clustered MCU > 2 x 8510s 1x 4510
I can't find any similar documentation on if this is possible.
Any advice would be appreciated.
Thanks,
Solved! Go to Solution.
07-31-2019 10:17 PM
The Admin Guides say that a "Cluster" can only be made on MSE8510 blades, so you wouldn't be able to add a 45xx to a cluster.
Please remember to mark helpful responses and to set your question as answered if appropriate.
07-31-2019 10:17 PM
The Admin Guides say that a "Cluster" can only be made on MSE8510 blades, so you wouldn't be able to add a 45xx to a cluster.
Please remember to mark helpful responses and to set your question as answered if appropriate.
07-31-2019 10:21 PM
Thanks so much Wayne, it's not perfect but we will remove a 8510 from the Conductor pool and cluster it with the MCU cluster and add the 45xx to the conductor pool in place.
Thanks for your quick answer mate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide